03
Feb
Turnbuckle Hardware & Turnbuckle Assemblies
Turnbuckles are constructed with a long sleeve with internal screw threads that accept a variety of fittings used to pull anchor points closer together or push them apart by turning the turnbuckle body. Turnbuckles can be manufactured in galvanized hardware... read more
08
Jan
Shackles are critical for different types of industrial lifting and rigging applications.They provide you with safety and efficiency when handling heavy loads.
There are various shackle types,and here we will focus on the most commonly used Chain Shackle(also called D Shackle), Anchor Shackle (also called Bow Shackle)
What are chain... read more
18
Sep
Worn-out, damaged, or overloaded slings may fail, causing injury or death!
Wire Rope Slings
Always inspect wire rope slings before use.
Never use worn-out or damaged slings.
Never overload a wire rope sling.
Free slings of all kinks, knots and twists.
Do not drop or rest a load on a... read more
28
Nov
Wire Rope Warning
GENERAL INFORMATION ON WIRE ROPE
The three basic components of a typical wire rope. (Fiber core is shown.)
COMPONENTS:
Wire rope consists of three basic components.
1. Wires.
2. Strands, formed by wires, laid helically around a core.
3. Core, or center.
MATERIAL:
Steel grades in wide use today are... read more
03
Dec
How to choose the webbing material for lifting slings?
The first step in choosing an appropriate web sling is to determine what material you need the sling to be made of. There are several different lifting slings to choose from including nylon slings,polyester slings,wire rope... read more
12
Jun
Chain and associated components can be subject to wear, twisting, misuse, overloading, intentional alteration, and corrosion. These and other usage variables may cause a reduction in working load limits. It is, therefore, important to regularly inspect all products to determine their safety prior to... read more
20
Jan
Controlling Magnetism in Stainless Steel Products
Magnetism is sometimes a factor in deciding which fastener to use. If a 100% nonmagnetic stainless steel fastener is required steps can be taken to reduce the amount of cold working done to a part, e.g. thread cutting vs.... read more
06
Nov
What is a chain binder?
Also called a load binder, chain binders are a device to tighten chain when securing a load for transport. There are two general styles of chain binders – ratchet binder and lever binder. The method of tightening the binder is... read more
20
Oct
Here in the Midwest- like most of the country- we’ve had some extreme temperatures this summer. While we all know hot temps can be dangerous if you’re outside for a long time, it’s also important to remember your outdoor equipment is taking a beating... read more
28
Nov
Wire Rope Warning
GENERAL INFORMATION ON WIRE ROPE
The three basic components of a typical wire rope. (Fiber core is shown.)
COMPONENTS:
Wire rope consists of three basic components.
1. Wires.
2. Strands, formed by wires, laid helically around a core.
3. Core, or center.
MATERIAL:
Steel grades in wide use today are... read more